Hard Oil Clear 241 0.25 l
€18.20
Product information "Hard Oil Clear 241 0.25 l"
Application
For universal use. For impregnating all absorbent interior surfaces (wood, cork, porous stone), especially in areas subject to heavy wear (e.g. floors, doors, worktops, etc.). The durability of the surface can be significantly increased with a final treatment with Hard Oil Special 245.
Technical properties
Water-repellent, open-pored impregnation. Good fullness. Low yellowing. Not suitable for damp areas.
Colour
Transparent, colourless to slightly yellowish. Light-coloured surfaces dry slightly darker.
Ingredients
Safflower oil stand oil, safflower oil, natural resin ester, isoparaffins, drying agents.
Substrate and preparation
The substrate must be dry, solid, absorbent, clean and free of resin and dust. Product is ready to use. Stir carefully before use!
How to apply
Brushing, rolling, spraying, dipping. Room and surface temperature above 15 °C. The product should be applied in at least two coats. This can be done wet-on-wet: The second coat can be applied after a waiting time of 20-30 minutes. Important note: Irrespective of the application, the excess oil must be carefully removed approx. 30 minutes after the last application.
Sprayability: Non-binding guide values: Airless: nozzle 0.20 mm, spray angle: approx. 30°-40°, filter approx. 100-180 meshes, high pressure: nozzle 0.20 mm, spray angle 30° filter 100-180 meshes, low pressure: nozzle 0.20 mm
Drying time
At 20 °C and 50 % relative humidity: Dust-dry after approx. 8 hours. Tread-resistant and suitable for further treatment after at least 16-20 hours. For reliable drying and to avoid odour formation, we always recommend using a fan to ensure sufficient air circulation on the surface of the paint during the drying phase.
Coverage
Approx. 50-70 ml per m², per coat.
Thinner and cleaning agent
LEINOS Thinner 200.
Storage and shelf life
Stable for at least 2 years when originally sealed. Store in a cool, dry place. Close opened containers tightly, decant leftovers into smaller containers.
Special notes
Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding!
VOC content: 460 g/l, EU limit value: 700 g/l (cat. f). GISCODE: Ö 60+ / EAK: 08 01 02
Hazard statements
Contains: Hydrocarbons, C10-C13, n-alkanes, iso-alkanes, cyclic, < 2% aromatics. May be fatal if swallowed and enters airways. Repeated exposure may cause skin dryness or cracking. Safety data sheet available on request.
Safety instructions
Keep out of reach of children.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Do NOT induce vomiting.
Avoid release to the environment.
Dispose of contents/container to an appropriate recycling or disposal facility.
Technical data sheet (PDF) · Safety data sheet (PDF, in German)
| Size: | 0.25 l |
|---|
Login