Brush-on plasters
Application Indoors. For all absorbent, mineral substrates, coatings in drywall construction, on fixed wallpaper and especially for clay substrates. Technical properties Solvent-free and water vapour permeable. Results in a matt, slightly rough surface and supports the moisture regulation of the living space. Reversible. Grain size approx. 0.015 mm. Colour Cream white, matt, can be individually tinted with LEINOS pigment concentrates 668. Ingredients Water, clay, chalk, cellulose, titanium oxide, polyaspartic acid, talc, starch ester polymer, isothiazolinones. Substrate and preparation The substrate must be dry, solid, absorbent, clean and dust-free. If in doubt, apply a test coat and, if necessary, prime with LEINOS Deep Sealer 620. How to apply Always stir well before use and during application. Apply the paint evenly with a roller, brush or flat brush and spread in all directions. As a rule, 1 coat is sufficient. Ventilate well during application and drying time. Drying time At 20 °C and 50 % relative humidity: Approx. 6-12 hours. Coverage 1 litre is sufficient for approx. 4-4.5 m². Thinner and cleaning agent The product is ready to use. Wash out tools immediately after use with water and LEINOS Vegetable Soap 930. Storage and shelf life Store in a cool, dry and frost-free place. Shelf life is at least 1 year if unopened. Use up opened containers within 2 days. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application Interior. For all absorbent, mineral-based substrates, coatings in drywall construction, on firmly adhered wallpaper and, in particular, for clay substrates. Technical properties Solvent-free and vapour-permeable. Produces a matt, textured finish and helps regulate humidity in the living space. Reversible. Colour Natural white, matt, can be custom-tinted using LEINOS Pigment Concentrates 668. Ingredients Water, clay, chalk, cellulose, titanium dioxide, polyaspartic acid, talc, starch ester polymer, isothiazolinones. Substrate and preparation The surface must be dry, solid and absorbent. If in doubt, carry out a test application and, if necessary, prime with LEINOS Deep Sealer 620. How to apply Always stir thoroughly before use and whilst applying. Apply the paint evenly using a roller, brush or flat brush, working it in all directions. One coat is usually sufficient. Ensure the room is well ventilated whilst applying the paint and whilst it is drying. Drying time At 20 °C and 50 per cent relative humidity: approx. 6–12 hours. Coverage 1 litre is enough for approx. 4–4.5 m². Thinner and cleaning agent The product is ready for use. Wash tools immediately after use with water and LEINOS Vegetable Soap 930. Storage and shelf life Store in a cool, dry and frost-free place. Unopened, it will keep for at least 1 year. Use opened containers within 2 days. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (Cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application Indoors, suitable for damp rooms. For all absorbent, mineral substrates indoors, such as lime plaster, cement plaster, sand-lime brick, cement, aerated concrete, brick, clay plaster, etc. Technical properties Solvent-free. Thanks to its particularly moisture-regulating properties in conjunction with a high alkalinity (pH value approx. 13), Lime Brush Rendering 667 is antibacterial and ideal for use in the area of mould growth. Silicifies with mineral substrates and produces a matt, fine-grained wall surface that can be painted over several times. Grain size approx. 0.13 mm. Colour Natural white, matt, can be tinted with all LEINOS lime-resistant pigment concentrates 668, addition max. 20 %. Ingredients Water, lime putty, chalk, marble powder, titanium dioxide, cellulose ether, organic binder. Substrate and preparation All substrates must be pre-treated in accordance with the specifications of VOB/C DIN 18363. Remove sintered skin from plaster surfaces mechanically. Pre-treat chalky and very absorbent surfaces with Silicate Primer 621 or Mineral Plaster Primer 622. New base coats must be at least 2 - 3 weeks old. Substrates with water-soluble, discolouring substances must first be tested for suitability. If in doubt, apply a test coat. How to apply Always stir well before use and during application. Apply the paint evenly with a brush or roller and spread in all directions. Stir Lime Brush Rendering 667 well. As a rule, 2 coats are applied undiluted. Drying time At 20 °C and 50 % relative humidity: Approx. 12 hours. Subsequent coats after 24 hours drying time. Coverage 1 litre is sufficient for approx. 3-5 m² per coat. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930, product is ready to use. Storage and shelf life Store in a cool but frost-free place. Can be stored for approx. 12 months if originally sealed. Special notes With their special properties, LEINOS lime paint products correspond to a very old paint tradition and are becoming increasingly popular, especially in the area of mould remediation, due to their high pH value. A slight cloud formation, glossy lime sinter layers and colour variations on the wall surface correspond to the typical appearance of a lime paint coat. This appearance is influenced by the substrate, temperature and humidity and is one of the natural properties of lime paint coatings. The ageing of lime paint coatings occurs through a continuous, very slow reduction in layer thickness and is referred to as chalking in the technical literature. This chalking is a typical property of the material and NOT a product defect. VOC content: <1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 19 Hazard statements Causes skin irritation. Contains: Calcium hydroxide. Causes serious eye damage. May cause respiratory irritation. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Use only outdoors or in a well-ventilated area. Avoid breathing spray mist. Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application Indoors. For the simple production of finely textured plaster surfaces on mineral substrates, in drywall construction. Very good substrate for a subsequent glazing technique. Technical properties Easy to apply, good filling capacity. Water vapour permeable according to DIN/EN ISO 7783-2 class 1. opacity class 2. grain size approx. 0.130 mm Colour Natural white, matt. Can be individually tinted with LEINOS pigment concentrates 668. Ingredients Water, chalk, titanium dioxide, vegetable emulsifier, polyaspartic acid, starch ester polymer, cellulose, talc, kaolin, methyl cellulose, isothiazolinone. Substrate and preparation The substrate must be chemically neutral, dry, clean, free of grease and dust and free of penetrating substances. Highly absorbent, unstable substrates and sanding plasters may need to be primed with LEINOS Deep Sealer 620. How to apply Brushing, rolling. Room and surface temperature above 15 °C. Once completely dry, it is an ideal substrate for colour design using the Varnish Binder 646 and the associated products Varnish Binder 646 and Pigment Concentrate 668. Drying time Approx. 16-24 hours. Completely dry and loadable after approx. 1 week. This system requires sufficient amounts of atmospheric oxygen for drying. Therefore, ensure good ventilation, e.g. with a fan in stagnant air, to avoid odours. Coverage Approx. 200-300 ml/m² per application, may vary depending on the absorbency of the substrate. Thinner and cleaning agent Can be diluted with water, product is ready to use. Clean tools with water and add LEINOS Vegetable Soap 930. Storage and shelf life Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost! Use up opened containers within 2 days. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application Indoors. For the simple creation of textured surfaces on mineral substrates and in drywall construction. Very good substrate for a subsequent glazing technique. Technical properties Easy to apply, good filling capacity. Water vapour permeable according to DIN/EN ISO 7783-2 class 1, opacity class 2. Colour Natural white, matt. Can be individually tinted with LEINOS pigment concentrates 668. Ingredients Water, chalk, titanium dioxide, vegetable emulsifier, polyaspartic acid, starch ester polymer, cellulose, talc, kaolin, methyl cellulose, isothiazolinone. Substrate and preparation The substrate must be chemically neutral, dry, solid, clean, free of grease and dust and free of penetrating substances. Highly absorbent, unstable substrates and sanding plasters may need to be primed with LEINOS Deep Sealer 620. How to apply Brushing, rolling. Room and surface temperature above 15 °C. Drying time Approx. 16-24 hours. Completely dry and loadable after approx. 1 week. This system requires sufficient amounts of atmospheric oxygen for drying. Therefore, ensure good ventilation, e.g. with a fan in stagnant air, to avoid odours. Coverage Approx. 200-300 ml/m² per application, may vary depending on the absorbency of the substrate. Thinner and cleaning agent Can be diluted with water. Product is ready to use. Clean tools with water and add LEINOS Vegetable Soap 930. Storage and shelf life Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost! Use up opened containers within 2 days. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application Interior. Silicate Paint for all load-bearing wall and ceiling surfaces, except paint and latex coatings. Ideal for damp rooms. Technical properties LEINOS Silicate Paint 692 is solvent-free, highly diffusible, provides good coverage, dries quickly and is matt. Gives uneven substrates a uniform texture and a fine-grained surface on smooth substrates. sd value approx. 0.01, pH value approx. 11, grain size approx. 0.13 mm. Mould-preventive: The product reacts alkaline and through silicification processes. As a result, the colour ingredients are not available to organisms (mould, algae, fungi, etc.) as a food source. Colour Natural white, can be tinted with alkali-resistant LEINOS pigment concentrates 668. Ingredients Water, potassium water glass, mineral pigments, organic binders. Substrate and preparation Stir carefully before use. The substrate must be dry, sound and clean. Paint, oil, latex and synthetic resin coatings must be removed. Substrates such as aerated concrete and other highly absorbent or sanding substrates are pre-treated with LEINOS Silicate Primer 621. Painter's fleece must also first be primed with LEINOS Silicate Primer 621. On substrates from which wallpaper has been removed, the substrate surface must be lightly sanded (100 grit) and well dedusted (first sweep or vacuum, then wipe with a damp cloth) or thoroughly cleaned with a brush and hot water. After 24 hours drying, prime with LEINOS Silicate Primer 621. Wallpaper paste residues can lead to adhesion problems and discolouration of the paint. Important note: When coating different substrates with water-based, open-pored paint systems, certain substances such as lignin, nicotine, rust, various salts or moisture can penetrate from the substrate and possibly lead to discolouration. It is therefore essential to check the substrate for suitability and carry out preliminary tests (sample surfaces). Substrates that have not yet been painted, as well as gypsum plaster and gypsum plasterboard surfaces, should first be pre-treated with LEINOS Silicate Primer 621. Pre-treatment with LEINOS Silicate Primer 621 is also advisable to equalise different absorbencies, e.g. filler and repair areas. If in doubt, apply a test coat. How to apply After stirring, apply with a roller or brush. When using a roller (soft paint roller), apply the product crosswise. After 24 hours, the plaster can be painted over or glazed. Drying time At 20 °C and 50 % relative humidity: In a normal climate, dust-dry after approx. 3 hours and recoatable after approx. 12 hours. Ensure good ventilation! Do not apply at temperatures below 5 °C. Coverage 1 litre is sufficient for 5-6 m² per coat, depending on the absorbency of the substrate. Thinner and cleaning agent Product is ready to use. Thinner with Silicate Primer 621 or water if necessary. Clean with water and LEINOS Vegetable Soap 930. Storage and shelf life Stable for at least 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost. Opened containers and diluted preparation cannot be stored. Risk of thickening if stored too warm. Special notes All LEINOS Silicate Paint products are particularly suitable for historical buildings, but also for use in modern architecture. In contrast to conventional paints bound with synthetic resins, silicate paints do not form a paint film after drying, but a paint layer. The ageing of these silicate paints is characterised by a continuous, very slow reduction in coating thickness. In technical literature, this behaviour is referred to as "chalking". This chalking is a typical property of the material and NOT a product defect. To achieve optimum results, the material must be thoroughly stirred and sieved before use so that dried colour particles are removed from the edge of the bucket or lid. These are typical properties of the material and NOT a product defect. VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 03 / GISCODE: M-SK 01 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Do not get in eyes, on skin, or on clothing. Caution! Product is alkaline! Protect eyes and skin against splashes. Splashes on glass, natural stone, aluminium, wood and paint should be washed off immediately with plenty of water. Technical data sheet (PDF) · Safety data sheet (PDF, in German)