Skip to main content Skip to search Skip to main navigation

Wall finishes

Filter products

Casein Wall Paint 640 2.5 kg
Casein Wall Paint 640

Application For white or coloured opaque, diffusion-open coatings on mineral substrates or firmly adhering wallpaper. Not suitable for damp rooms! Technical properties Highly opaque Casein Wall Paint in powder form for mixing with water. Water vapour permeable, reversible (can be removed again with water). Colour White, matt. Ready mixed, can be tinted with any LEINOS pigment concentrates 668. Ingredients Casein, chalk, marble flour, kaolin, diatomaceous earth, soda and methyl cellulose. No added preservatives or fragrances. Substrate and preparation Substrates that are not yet fully set, acidic or, above all, highly alkaline or highly absorbent must first be primed with LEINOS Deep Sealer 620 (water-based concentrate). The same applies to unstable substrates and sanding plasters. How to apply Brushing, rolling. Room and surface temperature above 15°C. A. Mixing: Stir 10 kg Casein Wall Paint 640 with approx. 7 litres of water until there are no more lumps. Then leave to swell for 30-60 minutes. Then add another 1 litre of water and stir well. It is best to work with a drill stirrer attachment. B. Tinting: Add the desired quantity of LEINOS Pigment Concentrate 668 and stir thoroughly. C. Application: The colour is best applied evenly with a roller or trowel. Avoid thick coats, rather apply two thin coats. Casein Wall Paint achieves its maximum opacity when dry. Due to its solubility in water, Casein Wall Paint is only suitable for the LEINOS glazing technique to a limited extent! Drying time Approx. 16-24 hours. Ensure good ventilation! Coverage Approx. 0.15 kg powder/m² per coat, may vary depending on the absorbency of the substrate. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930. Storage and shelf life Cool and dry. In powder form for many years. Consume immediately when mixed, as it contains no preservatives. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: €34.60
Clay Paint 655 2.5 l
Clay Paint 655

Application Indoors. For all absorbent, mineral substrates, coatings in drywall construction, on fixed wallpaper and especially for clay substrates. Technical properties Solvent-free and water vapour permeable. Results in a matt surface and supports the moisture regulation of the living space. Coverage class 2, reversible. Colour Natural white, matt, can be individually tinted with LEINOS Pigment Concentrate 668. Ingredients Water, clay, chalk, titanium dioxide, starch ester polymer, cellulose, isothiazolinones. Substrate and preparation The substrate must be dry, solid, absorbent, clean and dust-free. If in doubt, carry out a test coat. Always stir well before use and during application. How to apply Always stir well before use and during application. Apply the paint evenly with a roller, brush or flat brush and spread in all directions. As a rule, 1 coat is sufficient. Ventilate well during application and drying time. Sprayability (non-binding guide values): Airless: Working pressure approx. 100 bar, nozzle approx. 0.43 mm. Low pressure: Nozzle for wall paints, maximum air volume, Thinner 5 % with water. Drying time At 23 °C and 50 % relative humidity approx. 6-12 hours. Coverage The consumption is approx. 150 ml/m². Storage and shelf life Store in a cool, dry and frost-free place. Shelf life is at least 1 year if unopened. Use up opened containers within 2 days. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 19 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €33.01
Clay Plaster Fine 658 2.5 l
Clay Plaster Fine 658

Application Indoors. For all absorbent, mineral substrates, coatings in drywall construction, on fixed wallpaper and especially for clay substrates. Technical properties Solvent-free and water vapour permeable. Results in a matt, slightly rough surface and supports the moisture regulation of the living space. Reversible. Grain size approx. 0.015 mm. Colour Cream white, matt, can be individually tinted with LEINOS pigment concentrates 668. Ingredients Water, clay, chalk, cellulose, titanium oxide, polyaspartic acid, talc, starch ester polymer, isothiazolinones. Substrate and preparation The substrate must be dry, solid, absorbent, clean and dust-free. If in doubt, apply a test coat and, if necessary, prime with LEINOS Deep Sealer 620. How to apply Always stir well before use and during application. Apply the paint evenly with a roller, brush or flat brush and spread in all directions. As a rule, 1 coat is sufficient. Ventilate well during application and drying time. Drying time At 20 °C and 50 % relative humidity: Approx. 6-12 hours. Coverage 1 litre is sufficient for approx. 4-4.5 m². Thinner and cleaning agent The product is ready to use. Wash out tools immediately after use with water and LEINOS Vegetable Soap 930. Storage and shelf life Store in a cool, dry and frost-free place. Shelf life is at least 1 year if unopened. Use up opened containers within 2 days. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €39.36
Clay Plaster Mediterranean 657 2.5 l
Clay Plaster Mediterranean 657

Application Interior. For all absorbent, mineral-based substrates, coatings in drywall construction, on firmly adhered wallpaper and, in particular, for clay substrates. Technical properties Solvent-free and vapour-permeable. Produces a matt, textured finish and helps regulate humidity in the living space. Reversible. Colour Natural white, matt, can be custom-tinted using LEINOS Pigment Concentrates 668. Ingredients Water, clay, chalk, cellulose, titanium dioxide, polyaspartic acid, talc, starch ester polymer, isothiazolinones. Substrate and preparation The surface must be dry, solid and absorbent. If in doubt, carry out a test application and, if necessary, prime with LEINOS Deep Sealer 620. How to apply Always stir thoroughly before use and whilst applying. Apply the paint evenly using a roller, brush or flat brush, working it in all directions. One coat is usually sufficient. Ensure the room is well ventilated whilst applying the paint and whilst it is drying. Drying time At 20 °C and 50 per cent relative humidity: approx. 6–12 hours. Coverage 1 litre is enough for approx. 4–4.5 m². Thinner and cleaning agent The product is ready for use. Wash tools immediately after use with water and LEINOS Vegetable Soap 930. Storage and shelf life Store in a cool, dry and frost-free place. Unopened, it will keep for at least 1 year. Use opened containers within 2 days. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (Cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €39.36
Deep Sealer 620 10 l
Deep Sealer 620

Application For priming highly or differently absorbent substrates before further treatment with LEINOS wall paints: 640 Casein Wall Paint 650 White Emulsion Paint 655 Clay Paint 656 Clay Mix 657 Clay Plaster Mediterranean 658 Clay Plaster Fine 660 Natural Resin Emulsion Paint 670 Natural Mix 680 Plaster-Effect Paint Mediterranean 685 Plaster-Effect Paint Fine Technical properties Transparent primer. Very high vapour permeability. Colour Almost colourless after drying. Ingredients Water, shellac soap, natural resin soap, carnauba wax, beeswax, cellulose, potash, benzisothiazolinone. Substrate and preparation Suitable substrates are neutral plasters, porous stone, plasterboard and old, firmly adhering coats of wall paint. The substrate must be dry, clean and free of dust and grease. How to apply Brushing, rolling, spraying. Ambient and surface temperature above 15°C. As a primer, the product must be diluted 1:1 with water. Note: To achieve the full load-bearing capacity of the final coat, the substrate must still be moderately absorbent when applying the final coat. Drying time 2 - 4 hrs. Coverage Approx. 60-100 ml/m² when diluted, depending on the absorbency of the substrate. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930. Storage and shelf life Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost. Special notes EAK: 07 06 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €16.40
Interior Smoothing and Texturing Filler 684 5 kg
Interior Smoothing and Texturing Filler 684

Application For smoothing interior wall and ceiling surfaces and for filling joints in plasterboard and other building boards. Colour White, matt. Ready-mixed, tintable with LEINOS Water-based Pigment Concentrate 668, see Technical Data Sheet 668. Ingredients Finely ground calcium sulphate (natural gypsum), calcium carbonate and methyl cellulose. Substrate and preparation Can be used on stone, plaster, concrete, aerated concrete, insulating panels, etc. The substrate must be clean, solid, dry and sound. Dust, dirt, wallpaper, non-adherent or weakly bonded paints and loose, non-load-bearing plasters must be removed. Mixing ratio: Mix 1 kg of Interior Smoothing and Texturing Filler with 600 ml of water. Stir again briefly after 2-3 minutes. How to apply To fill holes and cracks, press Interior Smoothing and Texturing Filler 684 firmly into the cavity and level off. For smooth surfaces, re-fill if necessary or wet and smooth evenly with a sponge board. Further work, e.g. sanding, wallpapering, painting, can be carried out after complete drying. When laying plasterboard or wall panels, apply Interior Smoothing and Texturing Filler 684 in dots to the back of the panel, press on and align the panel. Processing temperature: At least +5 °C for substrate and room air temperature. Coverage Depending on application thickness. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930. Special notes When jointing plasterboard panels, there is no need to insert reinforcement strips if the panels are shaped accordingly. GISCODE: CP1 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €6.77
Lime Brush Rendering 667 2.5 l
Lime Brush Rendering 667

Application Indoors, suitable for damp rooms. For all absorbent, mineral substrates indoors, such as lime plaster, cement plaster, sand-lime brick, cement, aerated concrete, brick, clay plaster, etc. Technical properties Solvent-free. Thanks to its particularly moisture-regulating properties in conjunction with a high alkalinity (pH value approx. 13), Lime Brush Rendering 667 is antibacterial and ideal for use in the area of mould growth. Silicifies with mineral substrates and produces a matt, fine-grained wall surface that can be painted over several times. Grain size approx. 0.13 mm. Colour Natural white, matt, can be tinted with all LEINOS lime-resistant pigment concentrates 668, addition max. 20 %. Ingredients Water, lime putty, chalk, marble powder, titanium dioxide, cellulose ether, organic binder. Substrate and preparation All substrates must be pre-treated in accordance with the specifications of VOB/C DIN 18363. Remove sintered skin from plaster surfaces mechanically. Pre-treat chalky and very absorbent surfaces with Silicate Primer 621 or Mineral Plaster Primer 622. New base coats must be at least 2 - 3 weeks old. Substrates with water-soluble, discolouring substances must first be tested for suitability. If in doubt, apply a test coat. How to apply Always stir well before use and during application. Apply the paint evenly with a brush or roller and spread in all directions. Stir Lime Brush Rendering 667 well. As a rule, 2 coats are applied undiluted. Drying time At 20 °C and 50 % relative humidity: Approx. 12 hours. Subsequent coats after 24 hours drying time. Coverage 1 litre is sufficient for approx. 3-5 m² per coat. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930, product is ready to use. Storage and shelf life Store in a cool but frost-free place. Can be stored for approx. 12 months if originally sealed. Special notes With their special properties, LEINOS lime paint products correspond to a very old paint tradition and are becoming increasingly popular, especially in the area of mould remediation, due to their high pH value. A slight cloud formation, glossy lime sinter layers and colour variations on the wall surface correspond to the typical appearance of a lime paint coat. This appearance is influenced by the substrate, temperature and humidity and is one of the natural properties of lime paint coatings. The ageing of lime paint coatings occurs through a continuous, very slow reduction in layer thickness and is referred to as chalking in the technical literature. This chalking is a typical property of the material and NOT a product defect. VOC content: <1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 19 Hazard statements Causes skin irritation. Contains: Calcium hydroxide. Causes serious eye damage. May cause respiratory irritation. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Use only outdoors or in a well-ventilated area. Avoid breathing spray mist. Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €37.14
Lime Paint 665 2.5 l
Lime Paint 665

Application Indoors. For all absorbent, mineral substrates, e.g. lime plaster, cement plaster. Technical properties Solvent-free. Thanks to its particularly capillary properties and in conjunction with its high alkalinity (pH value approx. 13), Lime Paint 665 is antibacterial and ideal for use in mould prevention and remediation. Sd value approx. 0.01. Carbonates through the absorption of CO2 with mineral substrates. Results in a matt wall surface that can be painted over several times. Colour Natural white, matt, tintable with all lime-resistant LEINOS Pigment Concentrates 668, addition max. 20%. Ingredients Water, lime putty, chalk, marble powder, titanium oxide, cellulose ether, organic binder. Substrate and preparation The substrate must be dry, solid, absorbent, clean and free of efflorescence. Remove sintered skin from plaster surfaces mechanically. Pre-treat chalky and very absorbent surfaces with Mineral Plaster Primer 622. New base plasters must be at least 2-3 weeks old. Substrates with water-soluble, discolouring substances must first be tested for suitability. If in doubt, apply a test coat. How to apply Always stir well before use and during application. Ideally, the paint should be applied evenly with a brush or flat brush and spread in all directions. Pre-wet highly absorbent, old lime paint coats. Depending on the substrate, apply 2-3 coats. Thin all coats with up to 20 % water. Pre-wet subsequent coats if necessary. High room air temperatures increase the water requirement. Lime Paint only achieves its full opacity when dry. Sprayability: After appropriate Thinner and sieving of the thinned paint, LEINOS Lime Paint 665 can be applied with an appropriate airless spraying device (non-binding information). Nozzle: 0.025"-0.031", without gun filter, main filter Mesh#30, spray pressure: 150-180 bar, spray angle: 50° Drying time At 20 °C and 50 % relative humidity: approx. 6-12 hours. Subsequent coats after 24 hours drying time. Coverage 1 litre is sufficient for approx. 5-8 m² per coat. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930. product is NOT ready for use! Storage and shelf life Store in a cool but frost-free place. Can be stored for approx. 12 months if originally sealed. Special notes With their special properties, LEINOS lime paint products correspond to a very old paint tradition and are becoming increasingly popular, especially in the area of mould remediation, due to their high pH value. A slight cloud formation, glossy lime sinter layers and colour variations on the wall surface correspond to the typical appearance of a lime paint coating. This appearance is influenced by the substrate, temperature and humidity and is one of the natural properties of lime paint coatings. The ageing of lime paint coatings occurs through a continuous, very slow reduction in layer thickness and is referred to as chalking in the technical literature. This chalking is a typical property of the material and NOT a product defect. To achieve optimum results, the material must be stirred thoroughly before use, diluted with 20% water and sieved. This also removes dried colour particles from the bucket rim and lid. These are typical properties of the material and NOT a product defect. VOC content: 0 g/litre. EU limit value: 30 g/l (cat. a). EAK: 08 01 19 / GISCODE: BSW60 Hazard statements Causes skin irritation. Contains: Calcium hydroxide. Causes serious eye damage. May cause respiratory irritation. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Use only outdoors or in a well-ventilated area. Avoid breathing spray mist. Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €34.44
Lime universal scraper 683 5 kg
Lime universal scraper 683

Application Inside. Technical properties High-quality, organic lime putty for filling holes and smoothing walls. Can also be used for decorative wall design. Its moisture-regulating properties, in conjunction with the high pH value (approx. 13), make it ideal for use in mould remediation. Ingredients Marble powder, limestone powder, hydrated white lime, hydrated lime, methyl cellulose, vegetable polysaccharide. Polysaccharide. Substrate and preparation All substrates must be pre-treated in accordance with the specifications of VOB/C DIN 18363. Mineral substrates as well as gypsum fibreboards and firmly adhering old coatings are suitable for processing. Before levelling, we generally recommend an adhesion-promoting and absorbency-regulating primer coat with LEINOS Silicate Primer 621 or Mineral Plaster Primer 622. How to apply mix 20 kg of LEINOS Lime universal scraper thoroughly and lump-free with approx. 6 litres of clean water. Apply within 5 hours with a plastering board or smoothing trowel in layer thicknesses of 1 - 3 mm. The surface is felted or smoothed. Do not apply at temperatures below 5°C and allow to dry. LEINOS Lime Filler can be recoated with LEINOS Lime Paint and Silicate Paint products. IMPORTANT: Ensure alkali-resistant substrates and products! Carefully cover and protect eyes, skin and alkali-sensitive substrates. Drying time Depending on layer thickness, but at least 24 hours. Very slow drying from 3 mm layer thickness. Carbonation time: at least 2-3 days. Coverage Consumption per mm application thickness/m² approx. 1 kg. Thinner and cleaning agent Cleaning with water. Storage and shelf life Protect from moisture. Store dry and tightly closed. can be stored for 12 months. Special notes Always create a test area of at least two square metres to check the adhesion behaviour. The test area must be thoroughly dry before a definitive assessment of adhesion and cracking behaviour can be made. Do not leave the material wet but in a bucket to dry out and dispose of with household waste. With their special properties, LEINOS lime paint products are in keeping with a very old paint tradition and are becoming increasingly popular, particularly in the area of mould remediation, due to their high pH value and diffusion properties. A slight cloud formation, glossy lime sinter layers and colour variations on the wall surface correspond to the typical appearance of a lime paint coat. This appearance is influenced by the substrate, temperature and humidity and is one of the natural properties. The ageing of lime coatings is caused by a continuous, very slow reduction in coating thickness and is referred to as chalking in the technical literature. This chalking is a typical property of the material and NOT a product defect. Hazard statements Causes skin irritation. Contains: calcium hydroxide; natural hydraulic lime. Causes serious eye damage. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Use only outdoors or in a well-ventilated area. Avoid breathing spray mist. Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €38.72
Mineral Plaster Primer 622 2.5 l
Mineral Plaster Primer 622

Application For LEINOS Silicate and Lime Paints, e.g. on lime plaster, cement plaster, sand-lime brick, cement, aerated concrete, brick, concrete, clay brick, clay plaster, Fermacell, plasterboard, well-adhering old emulsion paint coats, etc. Technical properties Solvent-free and water vapour permeable. Produces a sand-rough surface for subsequent coating with silicate or lime paints. pH value approx. 11. Grain size approx. 0.04 mm. Colour Natural white, matt. Ingredients Water, potassium water glass, cellulose ether, chalk, marble powder, acrylate dispersion. Substrate and preparation The substrate must be dry, solid, absorbent, clean and dust-free. Treat slightly chalky but still stable substrates once generously with LEINOS Silicate Primer 621. Completely remove old, glossy latex, oil and varnish paints or treat with LEINOS Leaching Cleaner 950. If in doubt, apply a test coat. How to apply Brush or roll on the product undiluted or diluted up to max. 10 % with clean water. Always stir well before use and during application. Drying time At 20 °C and 50 % relative humidity: approx. 6-12 hours. Subsequent coats after 24 hours drying time. Coverage 1 litre is sufficient for approx. 5 m², depending on the structure and absorbency of the substrate. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930, product is ready to use. Storage and shelf life Store in a cool, dry and frost-free place. Stable for approx. 12 months when originally sealed. Special notes All LEINOS Silicate Paint products are particularly suitable for historical buildings, but also for use in modern architecture. In contrast to conventional paints bound with synthetic resins, silicate paints do not form a paint film after drying, but a paint layer. The ageing of these silicate paints is characterised by a continuous, very slow reduction in coating thickness. In technical literature, this behaviour is referred to as "chalking". This chalking is a typical property of the material and NOT a product defect. To achieve optimum results, the material must be thoroughly stirred and sieved before use so that dried colour particles are removed from the edge of the bucket or lid. These are typical properties of the material and NOT a product defect VOC content: <1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Do not get in eyes, on skin, or on clothing. Caution! Product is alkaline! Protect eyes and skin against splashes. Splashes on glass, natural stone, aluminium, wood and paint should be washed off immediately with plenty of water. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €30.10
Mould Protection Paint 695 1 l
Mould Protection Paint 695

Application Indoors against mould, algae and fungal infestation. LEINOS Mould Protection Paint is ready-to-use, solvent-free, based on vegetable and mineral raw materials and open to diffusion. Technical properties Solvent-free. The effect is based on a crystallisation process. This means that the colour ingredients are no longer available to organisms (mould, algae, fungi, etc.) as a source of food. The colour has a dry covering power. Damp areas on the wall become transparent. Due to its mode of action, the paint is not resistant to washing. Colour White. Tinting with LEINOS pigment concentrates 668 possible. Ingredients Water, silicic acid, common salt, calcium sulphate, cellulose, starch, titanium dioxide and plant extracts. Substrate and preparation The substrate must be dry, free of dust and grease, stable and moderately absorbent, free of separating agents, cracks and efflorescence. Treat surface mould infestation beforehand with LEINOS Mould Exx 960. How to apply At room temperatures above 12 °C. With roller or brush. Stir the paint well before use. Before drying, the paint looks like a non-covering coat. 2 coats are required for a reliable effect. Important: Structural damage, sources of moisture etc. must be repaired. Full opacity is only visible after drying. Drying time At 23 °C and 50 % relative humidity. Dries after a few minutes - high humidity extends the drying time. 2. Coat after 2-3 hours. Coverage Depending on substrate and application technique. Guide value 1 litre is sufficient for approx. 6.5 m² per coat. Determine the exact value on the object. Thinner and cleaning agent The product is ready to use. Clean tools immediately after use with warm water and LEINOS Vegetable Soap 930. Storage and shelf life Store in a cool, dry and frost-free place. Shelf life is at least 1 year if unopened. Keep opened containers tightly closed. Special notes VOC content: 1.0 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €26.08
Natural Resin Emulsion Paint 660 2.5 l
Natural Resin Emulsion Paint 660

Application For white or coloured opaque coatings on all mineral substrates or firmly adhering wallpaper. Technical properties High hiding power, easy to apply, very economical. Solvent-free, low yellowing. Water vapour permeable according to DIN/EN ISO 7783-2 class 1, wash resistant according to DIN/EN ISO 11998 and DIN EN 13300, class 3, opacity class 2, wet abrasion resistance class 3. Colour Natural white, matt. Can be tinted as desired with LEINOS pigment concentrates 668. Ingredients Water, chalk, titanium dioxide, vegetable emulsifier, polyaspartic acid, starch ester polymer, talc, kaolin, methyl cellulose, isothiazolinone. Substrate and preparation Stir carefully before use. The substrate must be dry, free of dust and grease, moderately absorbent but stable, free of separating agents, cracks, efflorescence and fungi. Prime the substrate with water-based LEINOS Deep Sealer 620 if necessary. If the substrate reacts strongly alkaline, it must be neutralised beforehand. To achieve optimum wash resistance in accordance with DIN EN ISO 11998 and DIN EN 13300, Class 3, the substrate must not be absorbent when applying the final coat. How to apply At room temperatures above 12 °C with roller, brush or airless device. A. Painting on plaster, concrete and woodchip wallpaper: Paint 1-2 coats depending on the absorbency of the substrate. B. Plasterboard, fabric wallpaper: Prime with LEINOS Deep Sealer 620 (water-based concentrate). Then paint 1-2 times. C. Solid old coatings: Thoroughly clean old emulsion paint coats. Remove all traces of distemper coats and rinse. Carry out a test coat! Remove all traces of old latex, oil and varnish paints. Then apply a coat of paint as described under point B, with primer if the substrate is highly absorbent. Sprayability (non-binding guide values): Airless: Working pressure approx. 100-120 bar, nozzles 0.38-0.43 mm, spray angle approx. 30°-40°, filter approx. 100-50 meshes. Low pressure: Nozzle for wall paints, maximum air volume, Thinner with 5 % water. Drying time At 20 °C and 50 % relative humidity approx. 16-24 hours. This system requires sufficient amounts of atmospheric oxygen, a dry substrate and a relative humidity that is not too high. Coverage Approx. 100-200 ml/m² per application, may vary depending on the absorbency of the substrate. Thinner and cleaning agent Can be diluted with water. Product is ready to use. Clean tools with water and add LEINOS Vegetable Soap 930. Storage and shelf life Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost! Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €33.01
Plaster-Effect Paint Fine 685 2.5 l
Plaster-Effect Paint Fine 685

Application Indoors. For the simple production of finely textured plaster surfaces on mineral substrates, in drywall construction. Very good substrate for a subsequent glazing technique. Technical properties Easy to apply, good filling capacity. Water vapour permeable according to DIN/EN ISO 7783-2 class 1. opacity class 2. grain size approx. 0.130 mm Colour Natural white, matt. Can be individually tinted with LEINOS pigment concentrates 668. Ingredients Water, chalk, titanium dioxide, vegetable emulsifier, polyaspartic acid, starch ester polymer, cellulose, talc, kaolin, methyl cellulose, isothiazolinone. Substrate and preparation The substrate must be chemically neutral, dry, clean, free of grease and dust and free of penetrating substances. Highly absorbent, unstable substrates and sanding plasters may need to be primed with LEINOS Deep Sealer 620. How to apply Brushing, rolling. Room and surface temperature above 15 °C. Once completely dry, it is an ideal substrate for colour design using the Varnish Binder 646 and the associated products Varnish Binder 646 and Pigment Concentrate 668. Drying time Approx. 16-24 hours. Completely dry and loadable after approx. 1 week. This system requires sufficient amounts of atmospheric oxygen for drying. Therefore, ensure good ventilation, e.g. with a fan in stagnant air, to avoid odours. Coverage Approx. 200-300 ml/m² per application, may vary depending on the absorbency of the substrate. Thinner and cleaning agent Can be diluted with water, product is ready to use. Clean tools with water and add LEINOS Vegetable Soap 930. Storage and shelf life Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost! Use up opened containers within 2 days. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €33.01
Plaster-Effect Paint Mediterranean 680 2.5 l
Plaster-Effect Paint Mediterranean 680

Application Indoors. For the simple creation of textured surfaces on mineral substrates and in drywall construction. Very good substrate for a subsequent glazing technique. Technical properties Easy to apply, good filling capacity. Water vapour permeable according to DIN/EN ISO 7783-2 class 1, opacity class 2. Colour Natural white, matt. Can be individually tinted with LEINOS pigment concentrates 668. Ingredients Water, chalk, titanium dioxide, vegetable emulsifier, polyaspartic acid, starch ester polymer, cellulose, talc, kaolin, methyl cellulose, isothiazolinone. Substrate and preparation The substrate must be chemically neutral, dry, solid, clean, free of grease and dust and free of penetrating substances. Highly absorbent, unstable substrates and sanding plasters may need to be primed with LEINOS Deep Sealer 620. How to apply Brushing, rolling. Room and surface temperature above 15 °C. Drying time Approx. 16-24 hours. Completely dry and loadable after approx. 1 week. This system requires sufficient amounts of atmospheric oxygen for drying. Therefore, ensure good ventilation, e.g. with a fan in stagnant air, to avoid odours. Coverage Approx. 200-300 ml/m² per application, may vary depending on the absorbency of the substrate. Thinner and cleaning agent Can be diluted with water. Product is ready to use. Clean tools with water and add LEINOS Vegetable Soap 930. Storage and shelf life Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost! Use up opened containers within 2 days. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €33.01
Scumble Filler 630 2.5 l
Scumble Filler 630

Application Semi-transparent levelling compound for the LEINOS levelling technique. Technical properties After drying, apply transparent Scumble Filler. Colour Can be individually tinted in conjunction with Pigment Concentrates 668. Almost colourless after drying without tinting. Ingredients Water, shellac soap, natural resin soap, carnauba wax, beeswax, methyl cellulose, talcum, calcium carbonate, alumina, benzisothiazolinone. Substrate and preparation To achieve optimum results, please observe the technical data sheets for all products used. The substrate must be chemically neutral, solid, dry, clean, free of grease and dust and free of penetrating substances. Depending on the desired result, first prime the substrate with LEINOS Smoothing and Texturing Filler 684 and Deep Sealer 620 diluted 1:1 with water. Alternatively, apply an opaque coat of Natural Resin Emulsion Paint 660 to achieve a finely textured substrate. Colour the glaze filler 630 individually with approx. 10% Pigment Concentrate 668. To achieve pastel shades, use half Pigment Concentrate 668 white and another coloured Pigment Concentrate. How to apply With Japanese putties or similar suitable putties. Room and surface temperature above 15 °C. A. Filling: Apply a thin layer of the coloured Scumble Filler 630 using a Japanese spatula or similar in the desired technique. At least 2, preferably 3 coats should be applied. This can be done in the same or different colour shades. The previous coat must be dry. B. Finishing: After drying, the coloured wall can be polished to a silky sheen with a lambskin polishing disc. Additional protection of the surface can be achieved by using LEINOS Wall Wax 350. Waxing considerably increases transparency and colour depth. C. Tip: LEINOS recommends first trying out the filler on a coated sample panel in order to be able to assess the choice of colour and technique. Drying time Can be ploughed over after 2 - 3 hours, polishable after approx. 24 hours. Coverage Between 30 and 70 g/m² per coat depending on the type of design and application method. Thinner and cleaning agent Product is ready to use. Clean tools immediately after use with water and LEINOS Pflanzenseife 930. Storage and shelf life Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost! Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 12 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €22.48
Silicate Clay Paint 689 2.5 l
Silicate Clay Paint 689

Application For all load-bearing interior wall and ceiling surfaces, except paint and latex coatings. Technical properties Wet abrasion class 2, contrast ratio class 2, sd value approx. 0.01m, pH value approx. 11. Mould-preventive: The product reacts alkaline and through silicification processes. Therefore, the colour ingredients are not available to organisms (mould, algae, fungi etc.) as a food source. Colour White. Ingredients Water, clay, chalk, potassium water glass, mineral pigments, organic binders, cellulose, vegetable emulsifier, polyaspartic acid. Substrate and preparation Plaster substrates that have not yet been painted, as well as gypsum plaster and plasterboard walls, should first be pre-treated with LEINOS Silicate Primer 621. Pre-treatment with LEINOS Silicate Primer 621 is also recommended to equalise different absorbencies, e.g. filler and repair areas. If in doubt, apply a test coat. Please note that smooth substrates will become somewhat grainy as a result of this primer. How to apply Silicate Clay Paint is easy to apply with a brush or roller after careful stirring. If necessary, dilute the first coat with max. 10 % water. The final coat is painted/rolled on undiluted. Sprayability (non-binding guide values): After appropriate thinning and sieving of the paint, LEINOS Silicate Clay Paint 689 can be applied accordingly. Airless: Working pressure approx. 100 bar, nozzle 0.25 mm, without gun filters, 50° spray angle. Drying time At 20 °C and 50 % relative humidity: Dust-dry after approx. 3 hours in a normal climate and can be painted over with Silicate Clay Paint after approx. 4 hours. Silicate Clay Paint is fully cured after 24 hours and can be glazed with Silicate Primer 621 (diluted 1:3 to 1:5 with water) and the alkali-resistant Pigment Concentrates for colouring. Ensure good ventilation! Coverage 1 litre is sufficient for 5-8 m² per coat, depending on the absorbency of the substrate. The consumption is approx. 150 ml/m². Thinner and cleaning agent Product is ready to use. Clean with water and LEINOS Vegetable Soap 930. Storage and shelf life Stable for at least 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost. Opened containers and diluted preparation cannot be stored. Special notes All LEINOS Silicate Paint products are particularly suitable for historical buildings, but also for use in modern architecture. In contrast to conventional paints bound with synthetic resins, silicate paints do not form a paint film after drying, but a paint layer. The ageing of these silicate paints is characterised by a continuous, very slow reduction in coating thickness. In technical literature, this behaviour is referred to as "chalking". This chalking is a typical property of the material and NOT a product defect. To achieve optimum results, the material must be thoroughly stirred and sieved before use so that dried colour particles are removed from the edge of the bucket or lid. These are typical properties of the material and NOT a product defect VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Do not get in eyes, on skin, or on clothing. Caution! Product is alkaline! Protect eyes and skin against splashes. Splashes on glass, natural stone, aluminium, wood and paint should be washed off immediately with plenty of water. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €36.13
Silicate Paint 690 2.5 l
Silicate Paint 690

Application Dispersion Silicate Paint for all load-bearing interior wall and ceiling surfaces, with the exception of lacquer and latex coatings. Technical properties Wet abrasion class 2, contrast ratio class 2, sd value approx. 0.01m, pH value approx. 11. Mould-preventive: The product reacts alkaline and through silicification processes. As a result, the colour ingredients are not available to organisms (mould, algae, fungi, etc.) as a source of food. Colour Natural white. Ingredients Water, potassium water glass, mineral pigments, organic binders. Substrate and preparation Plaster substrates that have not yet been painted, as well as gypsum plaster and plasterboard walls, should first be pre-treated with LEINOS Silicate Primer 621. Pre-treatment with LEINOS 621 Silicate Primer is also advisable for levelling different absorbencies, e.g. filler and repair areas. Substrates with water-soluble, discolouring ingredients must first be tested for suitability. If in doubt, apply a test coat. Please note that this primer will make smooth substrates somewhat grainy. How to apply The Silicate Paint can be easily applied by brush, roller or spraying after stirring. If necessary, dilute the first coat with max. 10 % water. Paint the final coat undiluted. After approx. 4 hours, the Silicate Paint can be recoated with Silicate Paint for a second coat. Sprayability (non-binding guide values): After appropriate Thinner and sieving of the paint, LEINOS Silicate Paint 690 can be applied accordingly. Airless: Working pressure approx. 100 bar, nozzle 0.25 mm, without gun filters, 50° spray angle. Drying time At 20 °C and 50 % relative humidity: Dust dry after approx. 3 hours and can be painted over with LEINOS Silicate Paint 690 after approx. 4 hours. The Silicate Paint is fully cured after 24 hours and can be glazed with LEINOS Silicate Primer 621 (diluted 1:3 to 1:5 with water) and the alkali-resistant LEINOS Pigment Concentrates 668 for colouring. Ensure good ventilation! Coverage 1 litre is sufficient for 5-8 m² per coat, depending on the absorbency of the substrate. The consumption is approx. 150 ml/m². Thinner and cleaning agent Product is ready to use. Clean with water and LEINOS Vegetable Soap 930. Storage and shelf life Stable for at least 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost. Opened containers and diluted preparation cannot be stored. Special notes All LEINOS Silicate Paint products are particularly suitable for historical buildings, but also for use in modern architecture. In contrast to conventional paints bound with synthetic resins, silicate paints do not form a paint film after drying, but a paint layer. The ageing of these silicate paints is characterised by a continuous, very slow reduction in coating thickness. In technical literature, this behaviour is referred to as "chalking". This chalking is a typical property of the material and NOT a product defect. To achieve optimum results, the material must be thoroughly stirred and sieved before use so that dried colour particles are removed from the edge of the bucket or lid. These are typical properties of the material and NOT a product defect. VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Do not get in eyes, on skin, or on clothing. Caution! Product is alkaline! Protect eyes and skin against splashes. Splashes on glass, natural stone, aluminium, wood and paint should be washed off immediately with plenty of water. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €33.86
Silicate Paint 692 10 l
Silicate Paint 692

Application Interior. Silicate Paint for all load-bearing wall and ceiling surfaces, except paint and latex coatings. Ideal for damp rooms. Technical properties LEINOS Silicate Paint 692 is solvent-free, highly diffusible, provides good coverage, dries quickly and is matt. Gives uneven substrates a uniform texture and a fine-grained surface on smooth substrates. sd value approx. 0.01, pH value approx. 11, grain size approx. 0.13 mm. Mould-preventive: The product reacts alkaline and through silicification processes. As a result, the colour ingredients are not available to organisms (mould, algae, fungi, etc.) as a food source. Colour Natural white, can be tinted with alkali-resistant LEINOS pigment concentrates 668. Ingredients Water, potassium water glass, mineral pigments, organic binders. Substrate and preparation Stir carefully before use. The substrate must be dry, sound and clean. Paint, oil, latex and synthetic resin coatings must be removed. Substrates such as aerated concrete and other highly absorbent or sanding substrates are pre-treated with LEINOS Silicate Primer 621. Painter's fleece must also first be primed with LEINOS Silicate Primer 621. On substrates from which wallpaper has been removed, the substrate surface must be lightly sanded (100 grit) and well dedusted (first sweep or vacuum, then wipe with a damp cloth) or thoroughly cleaned with a brush and hot water. After 24 hours drying, prime with LEINOS Silicate Primer 621. Wallpaper paste residues can lead to adhesion problems and discolouration of the paint. Important note: When coating different substrates with water-based, open-pored paint systems, certain substances such as lignin, nicotine, rust, various salts or moisture can penetrate from the substrate and possibly lead to discolouration. It is therefore essential to check the substrate for suitability and carry out preliminary tests (sample surfaces). Substrates that have not yet been painted, as well as gypsum plaster and gypsum plasterboard surfaces, should first be pre-treated with LEINOS Silicate Primer 621. Pre-treatment with LEINOS Silicate Primer 621 is also advisable to equalise different absorbencies, e.g. filler and repair areas. If in doubt, apply a test coat. How to apply After stirring, apply with a roller or brush. When using a roller (soft paint roller), apply the product crosswise. After 24 hours, the plaster can be painted over or glazed. Drying time At 20 °C and 50 % relative humidity: In a normal climate, dust-dry after approx. 3 hours and recoatable after approx. 12 hours. Ensure good ventilation! Do not apply at temperatures below 5 °C. Coverage 1 litre is sufficient for 5-6 m² per coat, depending on the absorbency of the substrate. Thinner and cleaning agent Product is ready to use. Thinner with Silicate Primer 621 or water if necessary. Clean with water and LEINOS Vegetable Soap 930. Storage and shelf life Stable for at least 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost. Opened containers and diluted preparation cannot be stored. Risk of thickening if stored too warm. Special notes All LEINOS Silicate Paint products are particularly suitable for historical buildings, but also for use in modern architecture. In contrast to conventional paints bound with synthetic resins, silicate paints do not form a paint film after drying, but a paint layer. The ageing of these silicate paints is characterised by a continuous, very slow reduction in coating thickness. In technical literature, this behaviour is referred to as "chalking". This chalking is a typical property of the material and NOT a product defect. To achieve optimum results, the material must be thoroughly stirred and sieved before use so that dried colour particles are removed from the edge of the bucket or lid. These are typical properties of the material and NOT a product defect. VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 03 / GISCODE: M-SK 01 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Do not get in eyes, on skin, or on clothing. Caution! Product is alkaline! Protect eyes and skin against splashes. Splashes on glass, natural stone, aluminium, wood and paint should be washed off immediately with plenty of water. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: €105.80
Silicate Primer 621 10 l
Silicate Primer 621

Application For substrate pre-treatment of subsequent silicate and lime paint coats. Technical properties Special, very highly water vapour permeable deep primer. Anti-fungal and mould-inhibiting, pH value approx. 11. Colour Almost colourless after drying. Ingredients Water, potassium water glass, organic binders. Substrate and preparation Depending on the strength and absorbency of the substrate, the product must be diluted with water up to a ratio of 1:3. ATTENTION: "Glazing" of the substrate must be avoided at all costs! How to apply Paint at an ambient and surface temperature above 15 °C. Carefully cover and protect eyes, skin and alkali-sensitive surfaces. Drying time At 20 °C and 50 % relative humidity approx. 1-3 hours. Coverage Approx. 100 ml/m² (thinned), depending on the absorbency of the substrate. Thinner and cleaning agent Cleaning with water. Storage and shelf life Stable for at least 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost! Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 03 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Do not get in eyes, on skin, or on clothing. Caution! Product is alkaline! Protect eyes and skin against splashes. Splashes on glass, natural stone, aluminium, wood and paint should be washed off immediately with plenty of water. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €11.53
Silicate-Hybrid Paint 694 2.5 l
Silicate-Hybrid Paint 694

Application Adhesive and finishing coat for embedding LEINOS Coating Fleece 725 in accordance with VOB DIN 18363, as well as for creating high-quality surfaces. For all load-bearing interior wall and ceiling surfaces, with the exception of paint and latex coatings. Technical properties In combination with an embedded glass fibre fleece, fire protection class A2 (non-combustible) is achieved in accordance with DIN 4102. A correspondingly classified substrate is required. Contrast ratio class 2, sd value approx. 0.01m, pH value approx. 11. Mould-preventive: The product reacts alkaline and through silicification processes. As a result, the colour ingredients are not available to organisms (mould, algae, fungi, etc.) as a food source. Colour Natural white. Ingredients Water, potassium-water glass, mineral pigments, modified organic binders. Substrate and preparation All surfaces to be reinforced must be prepared professionally in accordance with VOB Part C DIN 18636 or the BFS data sheets. Carefully remove wallpaper and paste residues. Depending on the quality requirements, the substrate should be at least a good Q2 levelling compound. Substrates with water-soluble, discolouring substances must be checked for suitability beforehand. Alkali-sensitive substrates must be covered. Smooth and non-absorbent substrates must be primed with LEINOS Mineral Plaster Primer, substrates with varying degrees of absorbency with LEINOS Silicate Primer 621, diluted 1:1 to 1:3 with water. LEINOS Silicate-Hybrid Paint is ready to use as a fleece adhesive and should NOT be diluted as an adhesive. How to apply LEINOS Silicate-Hybrid Paint is applied generously to all load-bearing substrates by rolling, brushing or spraying. One coat is sufficient! While the paint film is still wet (approx. 350-450 ml/m²), a glass fibre fleece (approx. 35 g/m² and 270 µm) is laid dry, free of creases and bubbles, with an overlap of approx. 5 cm and pressed down with a featheredge trowel. A wavy double seam cut creates an "almost invisible" seam area. The final coat is now applied immediately, wet on wet, with LEINOS Silicate-Hybrid Paint and can be thinned with water up to 5 % if necessary. Particularly advantageous: On filigree ceilings and prefabricated concrete walls, there is no need for time-consuming levelling work. Sprayability (non-binding guide values): Airless: Working pressure 120-140 bar, nozzle approx. 0.43 to 0.58 mm, spray angle approx. 40°, gun filter white 50 mesh, without HD filter. Drying time At least 24 hours at 20 °C and 50 % relative humidity. Ensure good ventilation! Coverage 1 litre is sufficient for approx. 1.5 m², depending on the absorbency of the substrate. The exact consumption must be determined in advance on a sample surface. Thinner and cleaning agent Product is ready to use as a non-woven adhesive and can be thinned with 5% water in the final coat. Clean with water and LEINOS Vegetable Soap 930. Storage and shelf life Stable for at least 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost. Opened containers cannot be stored. Special notes All LEINOS Silicate Paint products are particularly suitable for historical buildings, but also for use in modern architecture. In contrast to conventional paints bound with synthetic resins, silicate paints do not form a paint film after drying, but a paint layer. The ageing of these silicate paints is characterised by a continuous, very slow reduction in coating thickness. In technical literature, this behaviour is referred to as "chalking". This chalking is a typical property of the material and NOT a product defect. To achieve optimum results, the material must be thoroughly stirred and sieved before use so that dried colour particles are removed from the edge of the bucket or lid. These are typical properties of the material and NOT a product defect VOC content: 1 g/l, EU limit value: 30 g/l (cat a). EAK: 08 01 20 / GISCODE: M-SK 01 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Do not get in eyes, on skin, or on clothing. Caution! Product is alkaline! Protect eyes and skin against splashes. Splashes on glass, natural stone, aluminium, wood and paint should be washed off immediately with plenty of water. Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €35.81
Varnish Binder 646 0.75 l
Varnish Binder 646

Application Interior. For the production of coloured, diffusion-open wall glazes in combination with LEINOS Pigment Concentrates 668. Technical properties Very good water vapour permeability, non-yellowing, water-dilutable. Very economical concentrate. Lasurbinder 646 must therefore be mixed with water at a ratio of 1:5 to 1:6 before use. Colour Almost colourless after drying without tinting. Can be individually tinted with Leinos Pigment Concentrates 668. Ingredients Water, shellac soap, natural resin soap, carnauba wax, beeswax, methyl cellulose, potash, benzisothiazolinone. Substrate and preparation Stir carefully before use! The substrate must be dry, solid, clean, free from grease and dust and free from penetrating substances. The substrate should be evenly white so that the colour tones of the glazing technique are shown to their best advantage (e.g. painted with LEINOS White Emulsion Paint 650 or LEINOS Natural Resin Eminulsion Paint 660, LEINOS Plaster-Effect Paint Mediterranean 680 or LEINOS Plaster-Effect Paint Fine 685). How to apply With a brush or paintbrush, sponge or cotton wrap. Room and surface temperature above 15°C. Mix Lasurbinder 646 with water in a ratio of 1:5-1:6. Stir small quantities of LEINOS Water-based Pigment Concentrate 668 directly into the diluted Lasurbinder 646. Quickly glaze through so that the glaze does not dry and form edges. After an intermediate drying time of 2-4 hours, apply the next coat. Apply at least 2, preferably 3 coats of glaze. Always work from light to dark. Do not apply more than 2-3 coats of glaze per day to avoid softening the substrate. Please note: Keep stirring the glaze during application! Drying time Dried after 2-4 hours, completely dry after approx. 24 hours. Coverage Approx. 1 litre of the ready-to-use Lasurbinder 646 diluted with water is required for 15 m². This corresponds to approx. 70 ml/m² wall surface (15 ml/m² undiluted), but may vary depending on the absorbency of the substrate. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930. Storage and shelf life Store in a cool, dry and closed place. Protect from frost! Stable for approx. 12 months when originally sealed. Use opened containers or diluted Lasurbinder immediately. Special notes VOC content: <1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 03 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €26.19
White Emulsion Paint 650 10 l
White Emulsion Paint 650

Application For white or coloured opaque, diffusion-open coatings on all mineral substrates or firmly adhering wallpaper. Technical properties Good hiding power, easy to apply, very economical. Solvent-free, low yellowing. Water vapour permeable according to DIN/EN ISO 7783-2 class 1, wash resistant according to DIN/EN ISO 11998 and DIN EN 13300, class 3. Colour Natural white, matt. Ingredients Water, chalk, titanium dioxide, vegetable emulsifier, polyaspartic acid, starch ester polymer, talc, kaolin, methyl cellulose, isothiazolinone. Substrate and preparation Stir carefully before use. If the substrate reacts strongly alkaline, it must be neutralised. Loose substrates and sanding plasters must be primed with LEINOS Deep Sealer 620. To achieve wash resistance in accordance with DIN EN ISO 11998 and DIN EN 13300, class 3, the substrate must not be absorbent when applying the final coat. How to apply A. Coating on plaster, concrete and woodchip wallpaper: Paint 1-2 coats depending on the absorbency of the substrate. Drying time approx. 16-24 hours. B. Plasterboard, fabric wallpaper: Prime with LEINOS Deep Sealer 620, water-based concentrate. Then paint 1-2 coats. Drying time approx. 16-24 hours. C. Solid old coatings: Thoroughly clean old emulsion paint coats. Remove all traces of distemper and rinse. Carry out a test coat! Remove all traces of old latex, oil and varnish paints. Then apply a coat of paint as described under point A, with primer if the substrate is highly absorbent. Sprayability (non-binding guide values): Airless: Working pressure approx. 100-120 bar, nozzles 0.38-0.43 mm, spray angle approx. 30°-40°, filter approx. 100-50 meshes. Low pressure: Nozzle for wall paints, maximum air volume, Thinner with 5 % water. Drying time At 20 °C and 50 % relative humidity: approx. 16-24 hours. This system requires sufficient quantities of atmospheric oxygen, a dry substrate and a relative humidity that is not too high. Therefore, only work on a dry substrate and ensure good ventilation; if necessary, use a fan for safe drying and to prevent the formation of odours. Coverage Approx. 150 ml/m² per application, may vary depending on the absorbency of the substrate. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930, product is ready to use. Storage and shelf life Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost! Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: €66.44