Wood care products
Application Emulsion for the regular care of waxed, oiled surfaces, especially furniture. Has an antistatic effect. Gives the surfaces a silky lustre. Technical properties Made from natural raw materials, protects all oiled, waxed and varnished surfaces against dirt and mechanical abrasion. Gives a silky gloss surface after a short drying time, easy to polish. The treated surfaces are refreshed, open to diffusion and dirt-repellent. Ingredients Water, carnauba wax, micro wax, methyl cellulose, vegetable emulsifier, benzisothiazolinone. How to apply Apply undiluted to freshen up furniture surfaces. For floors, apply Thinner Care Emulsion (25 ml in 5 litres of water). Polish after drying. Coverage Depending on the application. Storage and shelf life Store in a cool but frost-free place. Close the bottle tightly after use. Special notes VOC content: 1 g/l, EU limit value: 30 g/l (category a). EAK: 07 06 01 / GISCODE: GHO Hazard statements Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application For treating all oiled and waxed surfaces such as wood, cork and linoleum in indoor areas, to prevent the formation of worn paths. Technical properties Transparent, easy to use. The open-pored, silk-matt, hard-wearing and water-repellent surface is resistant to yellowing. Tested for migration in accordance with DIN EN 71, Part 3. Sweat and saliva resistant in accordance with DIN 53160. Colour 002 Colourless Ingredients Linseed oil, wood oil, castor oil, natural resin esters, isoparaffins, zinc oxide, alumina, kaolin, talc, micro-wax, silica, drying agents. Substrate and preparation The substrate must be dry (wood moisture content max. 14 per cent) and free from dirt and grease. Clean using LEINOS Vegetable Soap 930 (wipe with a damp cloth). Rinse with clean water. Allow the floor to dry thoroughly. The floor temperature during application must be at least 16 °C. How to apply Stir thoroughly before use! Apply the Oil Refurbisher evenly and in a thin layer using a short-pile floor mop. After 15–20 minutes, remove any excess oil and polish the surface with a white pad. Heavily worn and faded, dry surfaces must be treated a second time with Oil Refurbisher. Heavily worn, stressed surfaces can also be treated with Hardwax Oil 290. Carry out a test application first! Ensure optimal fresh air circulation during application and drying! Oil wash: Depending on the degree of soiling and the absorbency of the wood, apply 100–200 ml/m² evenly. Then use a green pad to loosen the dirt and carefully wipe it away with a rubber squeegee or similar tool. Depending on the level of soiling, this soiled solution can be reused approximately 2–3 times on the adjacent area. Once the floor area of a room has been cleaned, rub it down completely once more with a white pad until no residue remains. To achieve a uniform surface finish, after a drying time of approx. 24 hours, Oil Refurbisher can be applied very thinly, drop by drop, using a white polishing pad. Carry out a test application first! Drying time Dry after 6–12 hours (20 °C, relative humidity 50–55 per cent); ready for sanding and recoating. Floors can be used with care after 1 day. Full use after 7–14 days. This system requires atmospheric oxygen to dry. Therefore, ensure good ventilation; if the air is stagnant, use a fan, for example (also to prevent odours from developing). Coverage Consumption and coverage depend on the absorbency of the surface and the intended use. Maintenance: approx. 30–40 ml/m². Oil cleaning: approx. 100–200 ml/m². Determine the exact consumption on site. Thinner and cleaning agent Immediately after use, clean with LEINOS Thinner 200. Storage and shelf life Store in a cool, dry place, away from frost. Seal the container tightly. Unopened, it will keep for at least 2 years. Remove any skin that may have formed before using again. Special notes Store work materials impregnated with the product, where the oil has not fully dried, in an airtight metal container or in water, and then dispose of them, as there is otherwise a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may cause a characteristic odour. When using spray equipment, wear approved respiratory protection. Wear a fine dust mask when sanding! Colour specifications and colour swatches are for guidance only. Colour variations are possible depending on the batch, substrate and printing technique. The dried original colour tone differs from the fresh colour tone in the container. A test coat with colour matching is therefore essential. Mix different batches of the same colour together. VOC content: 660 g/l. EU limit value: 700 g/l. (Cat. f). GISCODE: Ö 60+ / EAK: 08 01 11 Hazard statements Contains: Hydrocarbons, C10-C13, n-alkanes, iso-alkanes, cyclic, < 2% aromatics. May be fatal if swallowed and enters airways. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Safety data sheet available on request. Safety instructions Keep out of reach of children. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application Cleaning and care of furniture. To improve the odour of old cupboard interiors. Technical properties Cleans and cares for oiled, waxed, varnished or lacquered surfaces. Gives cupboards a subtle odour. Colour Milky. Ingredients Water, ethanol, carnauba wax, cedarwood oil, lavender oil. How to apply Shake well before use. Apply LEINOS Cupboard Refresher to a cloth and rub the surfaces to be treated with it. Polish if necessary. Check the surface for alcohol resistance before use and test the product on an inconspicuous area. Coverage Approx. 10 ml/m², depending on the absorbency of the surface. Thinner and cleaning agent Clean with LEINOS Thinner 200. Storage and shelf life Stable for at least 2 years when originally sealed. Protect from frost. Store in a cool, dry and sealed place. Special notes Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding! EAK: 08 01 11 / GISCODE: M-KH05 Hazard statements Contains cedar wood oil. May cause allergic reactions. Safety data sheet available on request. Safety instructions Keep out of reach of children. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application For all oiled, waxed and varnished surfaces such as wood, cork and linoleum. For basic care and maintenance care after cleaning the surfaces with Vegetable Soap. Add Floor Milk to clean mopping water. Technical properties Made from natural raw materials. Protects all oiled, waxed and varnished surfaces against dirt and mechanical abrasion. Gives a silky gloss surface after a short drying time, without polishing. The treated surfaces are refreshed, open to diffusion and dirt-repellent. Regular maintenance gives the treated surface an elegant patina. Ingredients Water, carnauba wax, bergamot oil, lavender oil, vegetable emulsifier. How to apply Shake carefully before use! Basic care of newly treated floors should be carried out after 4 weeks at the earliest (after cleaning with LEINOS Vegetable Soap 930). Approx. 10 - 30 ml Floor Milk to 10 litres of lukewarm water. Coverage Depending on the application. Storage and shelf life Store in a cool but frost-free place. Close the bottle tightly after use. Special notes EAK: 07 06 01 Hazard statements Contains bergamot oil. May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application For open-pored finishing and water-repellent protection of all mechanically stressed interior substrates, especially wood, cork and unglazed clay tiles in the floor area, as well as in demanding furniture construction. Technical properties Ointment-like consistency. High yield. Easy to repair by simple re-treatment. Permeable to water vapour. Tested for migration behaviour in accordance with DIN EN 71, Part 3. Colour Yellowish. Ingredients Walnut oil, safflower oil, carnauba wax, beeswax, natural resin ester, drying agents. The VOC content of this product is max. 1 g/l. The EU limit value is 400 g/l (category "e" from 2010). Substrate and preparation To achieve optimum results, please observe the technical data sheets for all products used. The substrate must be dry, solid, clean, free of grease and dust and must not be absorbent. How to apply With a cloth or single disc applicator. Room and surface temperature above 15 °C. A. Application on untreated or absorbent surfaces: 1. Prime with LEINOS Hard Oil 240 Uncoated linoleum can be waxed directly without primer. 2. Apply the floor wax 310 very thinly with a non-flowing cloth or, for large areas, with a single disc application machine. The wax must always be spread evenly and carefully immediately after application. 3. After a drying time of approx. 12 hours, the surface must be polished. If necessary, a second coat of wax can be applied after 14 days. This improves the durability of the surface. B. Renovation treatment for conventional surface sealers: Completely remove old coatings that close the pores. Then build up the coating as under A, with prior oil treatment if the substrate is absorbent. C. Coating structure for surfaces in need of renovation: Clean waxed surfaces with water and LEINOS Vegetable Soap 930. Remove stains and ingrained dirt with LEINOS Thinner 200, sand out if necessary. Then continue as described under A for absorbent surfaces. Drying time Can be polished after approx. 12 hours, can be walked on after approx. 48 hours, fully loadable after approx. 1 week. For reliable drying and to avoid odours, we always recommend the use of a fan to ensure sufficient air circulation on the surface during the drying phase. Coverage Approx. 5-10 g/m² per application. Apply sparingly to avoid drying problems! Thinner and cleaning agent LEINOS Thinner 200. Storage and shelf life Stable for at least 2 years when originally sealed. Store in a cool, dry and sealed place. Special notes Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding! VOC content: 1 g/l, EU limit value: 400 g/l (Cat: e). EAK: 08 01 12 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application For the care of naturally oiled, waxed and varnished interior surfaces. Technical properties Water-repellent, deeply penetrating impregnation. Tested for migration behaviour in accordance with DIN EN 71, Part 3. Colour Colourless to slightly yellowish. Ingredients Linseed oil, wood oil, ricin oil, natural resin ester, isoparaffins, drying agents. How to apply Shake carefully before use. Apply thinly to the furniture surfaces with a clean, soft cloth in the direction of the fibres or structure. Test the compatibility of furniture surfaces that have not been treated with LEINOS products on an inconspicuous area. Do not treat plastic surfaces made of polystyrene with LEINOS Furniture Polish! Coverage Approx. 10 ml/m². Thinner and cleaning agent Clean with LEINOS Thinner 200. Storage and shelf life Stable for at least 2 years when originally sealed. Store in a cool, dry and sealed place. Special notes Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding! Hazard statements Contains: Hydrocarbons, C10-C13, n-alkanes, iso-alkanes, cyclic, < 2% aromatics. May be fatal if swallowed and enters airways. Repeated exposure may cause skin dryness or cracking. Safety instructions Keep out of reach of children. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application For quick and easy open-pore finishing and care of previously waxed or oiled interior surfaces. Not suitable for floors and hard-wearing surfaces! Technical properties Quick and easy application. The natural oils penetrate deep into the wood. They keep it healthy and elastic and do not allow it to dry out. Good refresher for wood that has already been treated. No sanding required for re-treatment. No unpleasant odours. Resistant to saliva and perspiration in accordance with DIN 53160, migration behaviour tested in accordance with DIN EN 71, Part 3. Colour Colourless. Ingredients Linseed oil, safflower oil, wood oil, ricin oil, beeswax, carnauba wax, silica, clay, drying agents. How to apply Apply thinly to the furniture surfaces with a clean, soft cloth in the direction of the fibres or structure. Test the compatibility of furniture surfaces that have not been treated with LEINOS products on an inconspicuous area. Coverage Approx. 3-5 ml/m², depending on the surface. Thinner and cleaning agent Clean with LEINOS Thinner 200. Storage and shelf life Stable for at least 2 years when originally sealed. Store in a cool, dry and sealed place. Special notes Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding! EAK: 08 01 11 / GISCODE: M-KH05 Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application For quick and easy open-pore finishing and care of previously waxed or oiled surfaces made of wood, cork and stone indoors. Not suitable for floors and hard-wearing surfaces! Colour Colourless to slightly yellowish. Ingredients Linseed oil, sunflower oil, carnauba wax, beeswax, isoparaffins, clay, drying agents. Substrate and preparation The substrate must be dry, solid, clean, free of grease and dust and must not be absorbent. Heat Liquid Wax in a water bath at low temperatures. How to apply With a brush or cloth. Room and surface temperature above 15 °C. A. Coating structure for untreated or absorbent substrates: Prime with LEINOS Primer Oil 220 or LEINOS Hard Oil 240 and apply Liquid Wax 340 very thinly and evenly with a brush or non-linting cloth. After approx. 8-12 hours, polish in the direction of the fibres, either with a polishing brush or a soft cloth. B. Coating for surfaces in need of renovation: As under point A, for non-absorbent substrates without primer. Drying time Approx. 12-24 hours For reliable drying and to avoid odours, we always recommend using a fan to ensure sufficient air circulation on the surface of the paint during the drying phase. Coverage Approx. 35-50 ml/m² per application. Apply sparingly to avoid drying problems! Thinner and cleaning agent LEINOS Thinner 200 is a ready-to-use product. Storage and shelf life Stable for at least 2 years when originally sealed. Store in a cool, dry and sealed place. Special notes Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding! VOC content: max. 450 g/l, EU limit value: 700 g/l (cat. f). EAK: 08 01 11 / GISCODE: BSL40 Hazard statements Contains: Hydrocarbons, C10-C13, n-alkanes, iso-alkanes, cyclic, < 2% aromatics. May be fatal if swallowed and enters airways. Repeated exposure may cause skin dryness or cracking. Safety data sheet available on request. Safety instructions Keep out of reach of children. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)
Application For the care of untreated sanded or oiled wooden surfaces, such as furniture or worktops indoors. Not suitable for floors and other heavily used surfaces. Technical properties LEINOS Wood Care Balm is a solvent-free product. It penetrates deep into the wood and keeps it supple, protects it from drying out and prevents cracking. LEINOS Wood Care Balm gives the wood a silky lustre. It makes the wood surface water and dirt repellent, removes water stains and prevents them from forming. The product has a colour-refreshing effect and supports the natural grain. When used as intended, the product complies with Regulation (EC) No. 1935/2004 and the German Food, Commodities and Feed Code (LFGB). Colour Yellowish. Ingredients Vegetable oils and fats, lanolin, beeswax. Substrate and preparation Material, ambient and substrate temperature min. +10 °C to max. 30 °C. Clean the surface thoroughly with a suitable cleaning agent and allow to dry. Sand lightly if necessary (180 grit). The substrate must be dry (wood moisture content max. 14 %), solid, absorbent, clean and free of resin and dust. How to apply Apply a thin layer of LEINOS Wood Care Balm with a lint-free cloth and polish in well. Depending on the absorbency of the wood, several coats may be necessary during the first treatment. The treatment should be repeated regularly depending on the load on the surfaces. Coverage Depending on the type and absorbency of the wood. Thinner and cleaning agent Soap and water. Storage and shelf life Store in a cool and frost-free place. Shelf life is at least 24 months if unopened. Special notes Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding! EAK: 08 01 12 / GISCODE: Ö10+ Hazard statements Safety data sheet available on request. Safety instructions Keep out of reach of children. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Technical data sheet (PDF) · Safety data sheet (PDF, in German)