Skip to main content Skip to search Skip to main navigation

Decorative finishes

Filter products

Scumble Filler 630 2.5 l
Scumble Filler 630

Application Semi-transparent levelling compound for the LEINOS levelling technique. Technical properties After drying, apply transparent Scumble Filler. Colour Can be individually tinted in conjunction with Pigment Concentrates 668. Almost colourless after drying without tinting. Ingredients Water, shellac soap, natural resin soap, carnauba wax, beeswax, methyl cellulose, talcum, calcium carbonate, alumina, benzisothiazolinone. Substrate and preparation To achieve optimum results, please observe the technical data sheets for all products used. The substrate must be chemically neutral, solid, dry, clean, free of grease and dust and free of penetrating substances. Depending on the desired result, first prime the substrate with LEINOS Smoothing and Texturing Filler 684 and Deep Sealer 620 diluted 1:1 with water. Alternatively, apply an opaque coat of Natural Resin Emulsion Paint 660 to achieve a finely textured substrate. Colour the glaze filler 630 individually with approx. 10% Pigment Concentrate 668. To achieve pastel shades, use half Pigment Concentrate 668 white and another coloured Pigment Concentrate. How to apply With Japanese putties or similar suitable putties. Room and surface temperature above 15 °C. A. Filling: Apply a thin layer of the coloured Scumble Filler 630 using a Japanese spatula or similar in the desired technique. At least 2, preferably 3 coats should be applied. This can be done in the same or different colour shades. The previous coat must be dry. B. Finishing: After drying, the coloured wall can be polished to a silky sheen with a lambskin polishing disc. Additional protection of the surface can be achieved by using LEINOS Wall Wax 350. Waxing considerably increases transparency and colour depth. C. Tip: LEINOS recommends first trying out the filler on a coated sample panel in order to be able to assess the choice of colour and technique. Drying time Can be ploughed over after 2 - 3 hours, polishable after approx. 24 hours. Coverage Between 30 and 70 g/m² per coat depending on the type of design and application method. Thinner and cleaning agent Product is ready to use. Clean tools immediately after use with water and LEINOS Pflanzenseife 930. Storage and shelf life Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost! Special notes VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 12 / GISCODE: M-DF 01 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €22.48
Varnish Binder 646 0.75 l
Varnish Binder 646

Application Interior. For the production of coloured, diffusion-open wall glazes in combination with LEINOS Pigment Concentrates 668. Technical properties Very good water vapour permeability, non-yellowing, water-dilutable. Very economical concentrate. Lasurbinder 646 must therefore be mixed with water at a ratio of 1:5 to 1:6 before use. Colour Almost colourless after drying without tinting. Can be individually tinted with Leinos Pigment Concentrates 668. Ingredients Water, shellac soap, natural resin soap, carnauba wax, beeswax, methyl cellulose, potash, benzisothiazolinone. Substrate and preparation Stir carefully before use! The substrate must be dry, solid, clean, free from grease and dust and free from penetrating substances. The substrate should be evenly white so that the colour tones of the glazing technique are shown to their best advantage (e.g. painted with LEINOS White Emulsion Paint 650 or LEINOS Natural Resin Eminulsion Paint 660, LEINOS Plaster-Effect Paint Mediterranean 680 or LEINOS Plaster-Effect Paint Fine 685). How to apply With a brush or paintbrush, sponge or cotton wrap. Room and surface temperature above 15°C. Mix Lasurbinder 646 with water in a ratio of 1:5-1:6. Stir small quantities of LEINOS Water-based Pigment Concentrate 668 directly into the diluted Lasurbinder 646. Quickly glaze through so that the glaze does not dry and form edges. After an intermediate drying time of 2-4 hours, apply the next coat. Apply at least 2, preferably 3 coats of glaze. Always work from light to dark. Do not apply more than 2-3 coats of glaze per day to avoid softening the substrate. Please note: Keep stirring the glaze during application! Drying time Dried after 2-4 hours, completely dry after approx. 24 hours. Coverage Approx. 1 litre of the ready-to-use Lasurbinder 646 diluted with water is required for 15 m². This corresponds to approx. 70 ml/m² wall surface (15 ml/m² undiluted), but may vary depending on the absorbency of the substrate. Thinner and cleaning agent Water and LEINOS Vegetable Soap 930. Storage and shelf life Store in a cool, dry and closed place. Protect from frost! Stable for approx. 12 months when originally sealed. Use opened containers or diluted Lasurbinder immediately. Special notes VOC content: <1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 03 Hazard statements Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request. Safety instructions Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Hotline for allergy sufferers: +49 4163 / 867 47-0 Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Regular price: From €26.19