Skip to main content Skip to search Skip to main navigation

Hardwax Oil LF 291 Colourless 0.75 l

Product information "Hardwax Oil LF 291 Colourless 0.75 l"

Application

For priming and finishing all absorbent substrates, such as wood and cork floors, terracotta, stoneware tiles, neutral screed floors, wood-based panels such as Sterling OSB boards, etc., indoors.

Technical properties

Hardwax Oil LF is an oil-wax mixture, solvent-free. It gives the wood a durable finish and guarantees a hard-wearing surface. It revitalises the wood structure and gives it a velvety sheen. Tested for migration behaviour in accordance with DIN EN 71, Part 3 and tested for saliva and perspiration fastness in accordance with DIN 53160.

Colour

002 Colourless, 202 White.

Ingredients

Wood oil, linseed oil, ricin oil, sunflower oil, clay, kaolin, micro wax, mineral pigments (except colourless), drying agents.

Substrate and preparation

The substrate must be dry (wood moisture content max. 14 %), clean and dust-free. The application temperature should preferably not be below 16 °C. Drying behaviour is delayed at lower temperatures. Final sanding of the surfaces with at least 120 grit or grid.

How to apply

Apply Hardwax Oil LF evenly once with a double-sided trowel (approx. 15-30 ml/m², depending on the absorbency of the wood). Then pad thoroughly with a single disc polishing machine and green pad and polish the surface with a white pad. After 12 hours, apply a second thin coat of Hardwax Oil Colourless LF 291 or Hardwax Oil Colourless 290. For heavily used or particularly absorbent floors, apply a second coat sparingly the next day. Pad the surface with a white pad after 20-30 minutes. Ensure optimum fresh air circulation when applying and drying the products! Otherwise unpleasant odours are possible! Avoid layer formation at all costs! Please note: Floors must be laid without joints or levelled if necessary. If joints are present, oil may leak or noise may be generated when walking on the floor.

Drying time

The drying time is approx. 6-12 hours (20-23 °C / 50-55 % relative humidity). Complete drying and full load-bearing capacity after 7-10 days. For reliable drying and to avoid odours, we always recommend the use of a fan to ensure sufficient air circulation on the surface during the drying phase.

Coverage

15-30 ml/m²; coverage: approx. 30-60 m²/l depending on the substrate.

Thinner and cleaning agent

LEINOS Thinner 200.

Storage and shelf life

Store in a cool and dry place. Close container tightly. Stable for at least 2 years when originally sealed.

Special notes

Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding!

Colour specifications and colour imprints are non-binding. Colour deviations are possible depending on the batch, substrate and printing technique. The dried original colour shade differs from the fresh colour shade in the container. A test coat with colour matching is therefore essential. Mix different batches of the same colour shade together.

VOC content: 1 g/l, EU limit value: 700 g/l (cat. f). EAK: 08 01 11 / GISCODE: Ö 10+

Hazard statements

Safety data sheet available on request.

Safety instructions

Keep out of reach of children.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Do NOT induce vomiting.
Avoid release to the environment.
Dispose of contents/container to an appropriate recycling or disposal facility.

Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Colour: Colourless
Size: 0.75 l

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.