Insulating Primer 815 0.75 l
€26.40
Product information "Insulating Primer 815 0.75 l"
Application
Insulating coating against watery penetrating substrates indoors. Very well suited as a substrate for commercially available wool and fibre plasters.
Technical properties
Priming paint with good sealing effect. It produces a fine-grained, rough surface. This must be taken into account if Insulating Primer 815 is to be painted over with other LEINOS products.
Colour
Natural white.
Ingredients
Linseed oil, wood oil, ricin oil, natural resin ester, isoparaffins, talcum, chalk, titanium dioxide, alumina, drying agents.
How to apply
The substrate must be dry, clean, solid and free of dust and grease. Brushing, rolling (use a short-pile roller). Room and surface temperature above 15 °C. Paint low to normally absorbent plaster, concrete, cement, chipboard, gypsum fibreboard, metal and polystyrene boards with one full coat. Paint highly absorbent plaster, gypsum plasterboard, insulating fibreboard etc. twice. Check adhesion on non-absorbent substrates.
Drying time
At 20 °C/50-55 % relative humidity: Dust-dry after 8-10 hours, can be painted over with Insulating Primer after approx. 24 hours. Can be recoated with wool plaster after approx. 48-72 hours. For two coats with Insulating Primer after 4 days at the earliest. Ensure good ventilation!
Coverage
Do not exceed 100 ml/m² per coat.
Thinner and cleaning agent
Product is ready to use. Cleaning of tools: With LEINOS Thinner 200.
Storage and shelf life
Stable for at least 2 years when originally sealed. Store in a cool, dry and sealed place.
Special notes
Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding!
VOC content: 150 g/l, EU limit value: 400 g/l (cat. e). EAK: 08 01 02 / GISCODE: BSL10
Hazard statements
Repeated exposure may cause skin dryness or cracking. Safety data sheet available on request.
Safety instructions
Keep out of reach of children.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Do NOT induce vomiting.
Avoid release to the environment.
Dispose of contents/container to an appropriate recycling or disposal facility.
Technical data sheet (PDF) · Safety data sheet (PDF, in German)
| Size: | 0.75 l |
|---|
Login