Interior Smoothing and Texturing Filler 684 1 kg
€6.77
Product information "Interior Smoothing and Texturing Filler 684 1 kg"
Application
For smoothing interior wall and ceiling surfaces and for filling joints in plasterboard and other building boards.
Colour
White, matt. Ready-mixed, tintable with LEINOS Water-based Pigment Concentrate 668, see Technical Data Sheet 668.
Ingredients
Finely ground calcium sulphate (natural gypsum), calcium carbonate and methyl cellulose.
Substrate and preparation
Can be used on stone, plaster, concrete, aerated concrete, insulating panels, etc. The substrate must be clean, solid, dry and sound. Dust, dirt, wallpaper, non-adherent or weakly bonded paints and loose, non-load-bearing plasters must be removed. Mixing ratio: Mix 1 kg of Interior Smoothing and Texturing Filler with 600 ml of water. Stir again briefly after 2-3 minutes.
How to apply
To fill holes and cracks, press Interior Smoothing and Texturing Filler 684 firmly into the cavity and level off. For smooth surfaces, re-fill if necessary or wet and smooth evenly with a sponge board. Further work, e.g. sanding, wallpapering, painting, can be carried out after complete drying. When laying plasterboard or wall panels, apply Interior Smoothing and Texturing Filler 684 in dots to the back of the panel, press on and align the panel. Processing temperature: At least +5 °C for substrate and room air temperature.
Coverage
Depending on application thickness.
Thinner and cleaning agent
Water and LEINOS Vegetable Soap 930.
Special notes
When jointing plasterboard panels, there is no need to insert reinforcement strips if the panels are shaped accordingly.
GISCODE: CP1
Hazard statements
Safety data sheet available on request.
Safety instructions
Keep out of reach of children.
Avoid release to the environment.
Dispose of contents/container to an appropriate recycling or disposal facility.
Technical data sheet (PDF) · Safety data sheet (PDF, in German)
| Size: | 1 kg |
|---|
Login