Mineral Plaster Primer 622 2.5 l
€30.10
Product information "Mineral Plaster Primer 622 2.5 l"
Application
For LEINOS Silicate and Lime Paints, e.g. on lime plaster, cement plaster, sand-lime brick, cement, aerated concrete, brick, concrete, clay brick, clay plaster, Fermacell, plasterboard, well-adhering old emulsion paint coats, etc.
Technical properties
Solvent-free and water vapour permeable. Produces a sand-rough surface for subsequent coating with silicate or lime paints. pH value approx. 11. Grain size approx. 0.04 mm.
Colour
Natural white, matt.
Ingredients
Water, potassium water glass, cellulose ether, chalk, marble powder, acrylate dispersion.
Substrate and preparation
The substrate must be dry, solid, absorbent, clean and dust-free. Treat slightly chalky but still stable substrates once generously with LEINOS Silicate Primer 621. Completely remove old, glossy latex, oil and varnish paints or treat with LEINOS Leaching Cleaner 950. If in doubt, apply a test coat.
How to apply
Brush or roll on the product undiluted or diluted up to max. 10 % with clean water. Always stir well before use and during application.
Drying time
At 20 °C and 50 % relative humidity: approx. 6-12 hours. Subsequent coats after 24 hours drying time.
Coverage
1 litre is sufficient for approx. 5 m², depending on the structure and absorbency of the substrate.
Thinner and cleaning agent
Water and LEINOS Vegetable Soap 930, product is ready to use.
Storage and shelf life
Store in a cool, dry and frost-free place. Stable for approx. 12 months when originally sealed.
Special notes
All LEINOS Silicate Paint products are particularly suitable for historical buildings, but also for use in modern architecture. In contrast to conventional paints bound with synthetic resins, silicate paints do not form a paint film after drying, but a paint layer. The ageing of these silicate paints is characterised by a continuous, very slow reduction in coating thickness. In technical literature, this behaviour is referred to as "chalking". This chalking is a typical property of the material and NOT a product defect. To achieve optimum results, the material must be thoroughly stirred and sieved before use so that dried colour particles are removed from the edge of the bucket or lid. These are typical properties of the material and NOT a product defect
VOC content: <1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20
Hazard statements
Safety data sheet available on request.
Safety instructions
Keep out of reach of children. Avoid release to the environment. Dispose of contents/container to an appropriate recycling or disposal facility. Do not get in eyes, on skin, or on clothing. Caution! Product is alkaline! Protect eyes and skin against splashes. Splashes on glass, natural stone, aluminium, wood and paint should be washed off immediately with plenty of water.
Technical data sheet (PDF) · Safety data sheet (PDF, in German)
| Size: | 2.5 l |
|---|
Login