Natural Resin Emulsion Paint 660 2.5 l
€33.01
Product information "Natural Resin Emulsion Paint 660 2.5 l"
Application
For white or coloured opaque coatings on all mineral substrates or firmly adhering wallpaper.
Technical properties
High hiding power, easy to apply, very economical. Solvent-free, low yellowing. Water vapour permeable according to DIN/EN ISO 7783-2 class 1, wash resistant according to DIN/EN ISO 11998 and DIN EN 13300, class 3, opacity class 2, wet abrasion resistance class 3.
Colour
Natural white, matt. Can be tinted as desired with LEINOS pigment concentrates 668.
Ingredients
Water, chalk, titanium dioxide, vegetable emulsifier, polyaspartic acid, starch ester polymer, talc, kaolin, methyl cellulose, isothiazolinone.
Substrate and preparation
Stir carefully before use. The substrate must be dry, free of dust and grease, moderately absorbent but stable, free of separating agents, cracks, efflorescence and fungi. Prime the substrate with water-based LEINOS Deep Sealer 620 if necessary. If the substrate reacts strongly alkaline, it must be neutralised beforehand. To achieve optimum wash resistance in accordance with DIN EN ISO 11998 and DIN EN 13300, Class 3, the substrate must not be absorbent when applying the final coat.
How to apply
At room temperatures above 12 °C with roller, brush or airless device.
A. Painting on plaster, concrete and woodchip wallpaper: Paint 1-2 coats depending on the absorbency of the substrate.
B. Plasterboard, fabric wallpaper: Prime with LEINOS Deep Sealer 620 (water-based concentrate). Then paint 1-2 times.
C. Solid old coatings: Thoroughly clean old emulsion paint coats. Remove all traces of distemper coats and rinse. Carry out a test coat! Remove all traces of old latex, oil and varnish paints. Then apply a coat of paint as described under point B, with primer if the substrate is highly absorbent.
Sprayability (non-binding guide values):
Airless: Working pressure approx. 100-120 bar, nozzles 0.38-0.43 mm, spray angle approx. 30°-40°, filter approx. 100-50 meshes.
Low pressure: Nozzle for wall paints, maximum air volume, Thinner with 5 % water.
Drying time
At 20 °C and 50 % relative humidity approx. 16-24 hours. This system requires sufficient amounts of atmospheric oxygen, a dry substrate and a relative humidity that is not too high.
Coverage
Approx. 100-200 ml/m² per application, may vary depending on the absorbency of the substrate.
Thinner and cleaning agent
Can be diluted with water. Product is ready to use. Clean tools with water and add LEINOS Vegetable Soap 930.
Storage and shelf life
Stable for approx. 12 months when originally sealed. Store in a cool, dry and sealed place. Protect from frost!
Special notes
VOC content: 1 g/l, EU limit value: 30 g/l (cat. a). EAK: 08 01 20 / GISCODE: M-DF 01
Hazard statements
Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Safety data sheet available on request.
Safety instructions
Keep out of reach of children.
Avoid release to the environment.
Dispose of contents/container to an appropriate recycling or disposal facility.
Hotline for allergy sufferers: +49 4163 / 867 47-0
Technical data sheet (PDF) · Safety data sheet (PDF, in German)
| Size: | 2.5 l |
|---|
Login