Skip to main content Skip to search Skip to main navigation

Quick Sanding Primer 230 0.25 l

Product information "Quick Sanding Primer 230 0.25 l"

Application

Open-pored primer for highly absorbent substrates indoors, e.g. for end-grain parquet, cork or terracotta. Can also be used outdoors. Without fungal and UV protection.

Technical properties

Water-repellent, water vapour permeable. Penetrates deeply and remains elastic. Not suitable as a layer-forming material!

Colour

Transparent, slightly yellowish. Light-coloured woods dry slightly darker. Woods are stained to varying degrees depending on their growth. With all varnishes, a slight yellowing or dark yellowing occurs after some time.

Ingredients

Light-coloured, unbleached linseed oil, drying agents.

Substrate and preparation

The substrate must be dry, solid, clean, free of grease and dust, and absorbent. Pre-sand wooden surfaces with 150-180 grit in the direction of the grain.

How to apply

Brushing, rolling, spraying. Room and surface temperature above 15 °C. Apply one full coat. Carefully remove the shiny residue after 20 minutes, otherwise there is a risk of sticking.

Drying time

Dust-dry after 24-48 hours. Can be recoated after 2-4 days. For reliable drying and to avoid odours, we always recommend the use of a fan to ensure sufficient air circulation on the surface during the drying phase.

Note for untreated substrates:
Apply one full coat. After approx. 20 minutes, carefully remove the glossy excess, otherwise there is a risk of sticking. Then allow to dry for 24-48 hours. Can be recoated after approx. 2-4 days. Before further treatment with another LEINOS product, it must be ensured that the primed substrate is well dried and no longer absorbent in order to avoid impoverishment of the subsequent films and thus inferior surfaces!

Coverage

Approx. 50 - 70 ml/m² per coat, may vary depending on the absorbency of the substrate.

Thinner and cleaning agent

LEINOS Thinner 200 is a ready-to-use product.

Storage and shelf life

Stable for at least 2 years when originally sealed. Store in a cool, dry and sealed place.

Special notes

Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding!

VOC content: 1 g/litre. EU limit value: 700 g/l (cat. f). GISCODE: BSL10 / EAK: 08 01 11

Hazard statements

Safety data sheet available on request.

Safety instructions

Keep out of reach of children.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Do NOT induce vomiting.
Avoid release to the environment.
Dispose of contents/container to an appropriate recycling or disposal facility.

Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Size: 0.25 l

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.