Skip to main content Skip to search Skip to main navigation

Resin Lacquer Primer 810 0.25 l

Product information "Resin Lacquer Primer 810 0.25 l"

Application

Open-pored, biocide-free primer for wood and metal indoors and outdoors. Also suitable for wooden floors & stairs (indoors only).

Technical properties

Waterproof, elastic, good filling and covering properties, good drying and sanding properties. Permeable to water vapour.

Colour

Natural white, matt.

Ingredients

Binder based on vegetable oil, isoparaffins, titanium dioxide, chalk, talcum, drying agents.

Substrate and preparation

The product is ready for application. The substrate must be dry, solid, clean, free of grease and dust and only slightly absorbent.

How to apply

Stir carefully before use! Brushing, rolling, spraying. Ambient and surface temperature above 15 °C. Check compatibility and adhesion with the substrate by creating test areas. Protect surfaces from rain, wind, sunlight and condensation during application/drying.

For highly absorbent substrates, e.g. rough sawn wood, open-pored wood, we recommend priming with LEINOS Primer Primer, an intermediate coat of LEINOS Resin Lacquer Primer and a final coat of LEINOS Finishing Lacquer. Only apply an intermediate coat of LEINOS Resin Lacquer Primer if the primer coat was applied with LEINOS Primer Oil / Impregnation Primer. If the primer was applied with LEINOS Resin Lacquer Primer, omit the intermediate coat and start with the top coat.

A. Coating structure for untreated or absorbent substrates: Stir before use. apply 1 sparing coat of LEINOS Resin Lacquer Primer 810 at temperatures above 15 °C. Then continue with LEINOS White Lacquer 820, Finishing Lacquer 840 and Finishing Lacquer Mix 845.
B. Renovation on existing old coating: Completely remove old coatings that are not intact. Then apply a coat of paint as described under A. After sanding well and testing for compatibility, apply LEINOS White Lacquer 820, Finishing Lacquer 840 and Finishing Lacquer Mix 845 immediately.

Sprayability (non-binding guide values):
Airless: Working pressure 120 - 160 bar, fine surfaces (cabinets, mouldings, furniture): Nozzle 0.28 - 0.33 mm, General painting work (doors, walls, ceilings): Nozzle 0.33 - 0.38 mm, gun filter 200 mesh.
High pressure: Working pressure 2.0 - 2.5 bar, nozzle approx. 0.28 - 0.33 mm.
Low pressure: Working pressure 0.2 - 0.8 bar, nozzle size: for paint colours 1.6 - 1.8 mm.

Drying time

Dust-dry after approx. 3 hours. Dry, sandable and recoatable after 24 hours. This system requires sufficient quantities of atmospheric oxygen for drying. For reliable drying and to avoid odours, we always recommend the use of a fan to ensure sufficient air circulation on the surface during the drying phase.

Coverage

Approx. 60-80 ml/m² per coat. Apply sparingly to avoid drying problems!

Thinner and cleaning agent

LEINOS Thinner 200 is a ready-to-use product. Clean tools with Thinner immediately after use.

Storage and shelf life

Stable for at least 2 years when originally sealed. Store in a cool, dry and sealed place. Carefully remove any skin formation in the can before processing and do not stir in.

Special notes

Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding!

Colour specifications/imprints are non-binding. A test coat with colour matching is therefore essential.

VOC content: 350 g/l, EU limit value: 350 g/l (cat. g). GISCODE: BSL10 / EAK: 08 01 11

Hazard statements

Safety data sheet available on request.

Safety instructions

Keep out of reach of children.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Do NOT induce vomiting.
Avoid release to the environment.
Dispose of contents/container to an appropriate recycling or disposal facility.

Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Size: 0.25 l

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.