Skip to main content Skip to search Skip to main navigation

White Lacquer 820 satin-glossy 0.25 l

Product information "White Lacquer 820 satin-glossy 0.25 l"

Application

Off-porous topcoat for interior use on wood, metal and neutral stone. Suitable for dimensionally stable wooden components such as windows and doors. White Lacquer can be used for radiators as well as floor surfaces such as wooden stairs or floors. Cannot be used on aluminium and galvanised surfaces.

Technical properties

Water-resistant, elastic White Lacquer with good hardness and high hiding power. Good flow, high coverage, low yellowing. Water vapour permeable.

Colour

Natural white. 031 Silk gloss.

Ingredients

Binder based on vegetable oil, aliphatic hydrocarbons, titanium dioxide, mineral fillers, additives, drying agents.

Substrate and preparation

To achieve optimum results, please observe the technical data sheets for all products used. The substrate must be dry, solid, clean, free of grease and dust and must not be absorbent.

How to apply

Product is ready to use. Stir carefully before use! Brushing, rolling or spraying. Room and surface temperature above 15 °C. Check compatibility and adhesion with the substrate by creating test surfaces. Lightly sand (P180) between priming and intermediate coats after drying. Wear a dust mask when sanding! If necessary, a second coat of White Lacquer can be applied. The final gloss level is achieved 2-3 weeks after application.

A. Coating structure on untreated or absorbent substrates: Prime absorbent substrates with LEINOS Primer Oil 220, in damp areas with LEINOS Impregnation Primer 150. Alternatively, apply 1 coat of LEINOS Resin Lacquer Primer 810. After drying, apply 1-2 coats of White Lacquer 820.
B. Renovation coat on existing old coat: Sand and remove dust. Then apply 1-2 top coats of White Lacquer 820, with primer if the substrate is absorbent.
C. Renovation coat on heavily damaged old coat: Completely remove any loose paint, then sand. Further coat build-up as under A, with primer if the substrate is absorbent.

Sprayability (non-binding guide values):
Airless: Working pressure 120 - 160 bar, fine surfaces (cabinets, mouldings, furniture): Nozzle 0.28 - 0.33 mm, General painting work (doors, walls, ceilings): Nozzle 0.33 - 0.38 mm, gun filter 200 mesh.
High pressure: Working pressure 2.0 - 2.5 bar, nozzle approx. 0.28 - 0.33 mm.
Low pressure: Working pressure 0.2 - 0.8 bar, nozzle size: for paint colours 1.6 - 1.8 mm.

Drying time

Dust-dry after approx. 8-10 hours, dry and paintable after approx. 24 hours, completely dry after approx. 3-6 days. This system requires sufficient quantities of atmospheric oxygen for drying. For reliable drying and to avoid odours, we always recommend using a fan to ensure sufficient air circulation on the surface of the paint during the drying phase.

Coverage

Approx. 70-100 ml/m² per coat. Apply sparingly to avoid drying problems!

Thinner and cleaning agent

Product is ready to use. Clean tools immediately after use with LEINOS Thinner 200.

Storage and shelf life

Stable for at least 2 years when originally sealed. Store in a cool, dry and sealed place. Carefully remove any skin formation in the can before processing and do not stir in.

Special notes

Work materials soaked in product with oil that is not completely dry should be stored in an airtight metal container/water and then disposed of, otherwise there is a risk of spontaneous combustion due to the vegetable oil content. The natural raw materials used may give off a typical odour. Wear approved respiratory protection when using spraying equipment. Wear a fine dust mask when sanding!

VOC content: 295 g/l, EU limit value: 300 g/l (cat. d). EAK: 08 01 11 / GISCODE: BSL10

Hazard statements

Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Contains cobalt octoate. May cause allergic reactions. Safety data sheet available on request.

Safety instructions

Keep out of reach of children.
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Do NOT induce vomiting.
Avoid release to the environment.
Dispose of contents/container to an appropriate recycling or disposal facility.

Technical data sheet (PDF) · Safety data sheet (PDF, in German)

Colour: satin-glossy
Size: 0.25 l

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.